GB/T 36173-2018 Translated English of Chinese Standard. (GBT 36173-2018, GB/T36173-2018, GBT36173-2018): Restrained Joint Systems for Ductile Iron Pipelines - Design Rules and Type Testinghttps://www.chinesestandard.net, 2019 M01 20 - 12 pages This Standard specifies the terms and definitions, design rules and type testing of restrained joints systems for ductile iron pipelines. This Standard is applicable to the ductile iron pipelines conforming to the provisions of GB/T 13295 and GB/T 26081. |
Common terms and phrases
0.5mm whichever 5.1 Second paragraph Allowable deflection angle allowable operating pressure Appendix Applications GB/T axial movement axial pull-out force bell-mouth Clause Number clearance or 0.5mm Compared with ISO components Correspondence of Clause cyclic internal pressure design radial clearance Design Rules ductile iron pipelines Ductile Iron Pipes endured safely Fifth paragraph internal pressure test internal pressure type joint or stop-off joint shall take joint straightly maximum allowable operating maximum design radial minimum design negative internal pressure nominal diameter DN nominal pressure PN number of cycles operating pressure PMA paragraph in 5.3 positive internal pressure pressure continues pressure type test restrained joint pipeline Restrained Joint Systems Rules and Type seal rubber ring Self-anchored joint Standard and ISO Standard to ISO stipulated in GB/T stop-off joint Systems for Ductile Table A.1 Technical Differences terms and definitions test as required test assembly test device test pressure thickness of restrained Third paragraph V-shaped spacer